Vento Flex - Ingenium Integration

Vento Flex

Combining tube, profile and sheet metal laser cutting capabilities in one machine, high performance, productivity and flexibility are the hallmarks of the Nukon Vento Flex. The ideal machine for organisations that require maximum flexibility, Vento Flex is also equipped with linear motors for uncompromising speed, control and efficiency.

VENTO FLEX 315/420/620

Vento Flex Fiber Laser Cutting Machine

  • Tube, profile and sheet metal laser cutting in one machine
  • High power and high performance
  • Linear motor drives for greater speed, control and cost efficiency
  • Choose from 315, 420 or 620 linear sheet/table sizes
  • Specially designed cutting table for loading/unloading flat sheets, pipes and profiles
  • 2kW, 3 kW, 4 kW and 6kW laser power options
  • Single control for switching from flat sheet to tube and profiles

CUTTING TABLE

A key feature of the Nukon Vento Flex is the specially designed cutting table which is used for loading and unloading both flat metal sheet and tube, pipe and profile materials. Pipe and profile unloading is simplified thanks to a special U-shaped grooved area on the cutting table. Where the full table area is required for unloading metal sheet, removal of the grooved area is simple and straightforward.

FEEDING CHUCK

The automated feeding chuck holds materials of between Ø15-Ø150 mm. Jaw clamping benefits from pneumatic drive with adjustable pressure. The profile rotation axis and profile driving axis are servo-motor controlled.

FRONT CHUCK

The front chuck holds materials of between Ø15 and Ø150mm and benefits from four manually adjusted, supported roller jaws.

Optional - SUPPORTS

Ensure secure positioning and zero oscillation of materials during the cutting process according to the cross-section and length of pipes and profiles being cut.

MACHINE MODEL VENTO 315 VENTO 420 VENTO 620
Sheet Dimensions 1530mm x 3050mm / 5x10ft 2030mm x 4050mm / 6.6×13.2ft 2030mm x 6050mm / 6.6×19.8ft
Resonator Power (kW) 2, 3, 4 and 6 2, 3, 4 and 6 2, 3, 4 and 6
Axis X 3050mm/10ft 4050mm/13.2ft 6050mm/19.85ft
Y 1530mm/5ft 2030mm/6.6ft 2030mm/6.6ft
Z 145mm/5.7″ 145mm/5.7″ 145mm/5.7″
Working Table Height 900mm/35.55″ 900mm/35.55″ 900mm/35.55″
Maximum Loading Capacity 2000 kg/4409 lbs 3500 kg/7716lbs 6000 kg/11023lbs
Positioning System Servo Motor / Rack and Pinion Servo Motor / Rack and Pinion Servo motor / Rack and Pinion
Acceleration 20 m/s² 15 m/s² 15 m/s²
Axis Speed
(X, Y Simultaneous Speed)
140 m/min 140 m/min 140 m/min
Positioning Accuracy / (Pa)* 0.1mm/0.039″ 0.1mm/0.039″ 0.1mm/0.039″
Shuttle Table Change Time 27 sec 35 sec 45 sec
Controller 19″ Multi-Touch Screen 19″ Multi-Touch Screen 19″ Multi-Touch Screen
Assist Gas Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Oxygen (O2) : 15 Bar
Nitrogen (N2) : 25 Bar
Optional Equipments -Auto Nozzle Changing
-Loading/Unloading System
-Air Cutting

-Cut Line**
-Piercing Sensor & Cut Detection ***
-Auto Nozzle Changing
-Loading/Unloading System
-Air Cutting

-Cut Line**
-Piercing Sensor & Cut Detection ***
-Auto Nozzle Changing
-Air Cutting

-Cut Line**
-Piercing Sensor & Cut Detection ***
Machine Weight
22500 kg/49604 lbs 27000 kg/59525 lbs 33500 kg/73855 lbs
 MACHINE MODEL VENLO FLEX COMBINE 315/420/620
 Axis X 6530mm/257″
Y 200mm/7.8″
Z 145mm/5.7″
U nx360°
 Supports Automatic Servo Adjustment and Pneumatic Driven
 Axis Speed X-Axis 100 m/min
U1-U2  Axis 360°/sec
Maximum Profile Thickness Cutting Capacity  Power 2 kW
 Mild Steel 8mm/.31″
 Stainless Steel 6mm/.23″
 Aluminum 5mm/.19″
 Brass 3mm/.11″
 Cooper 3mm/.11″
 Max. Outer Circle Diameter Ø 170mm/6.70″
 Max. Pipe Diameter Ø 150mm/5.90″
 Max. Square Side Length 120mm x 120mm/4.72″ x 4.72″
 Max. Rectangular Side Length 140mm x 80mm
 Feed Length 6500mm/21.32ft
 Max. Loading Weight 25 kg/m
 Remnant 185mm/7.28″

Go back